
Commercial solar distribution board with secondary network protection – SolarEdge SE82.8K
Commercial SolarEdge switchboard with Grid Protection Relay (GPR). Ideal for 100kW PV solar systems using SolarEdge 82.8KW inverter
Designed to suit
SolarEdge 50kW inverter (SE50K)
Physical specifications
855(H) x 590(W) x 360(D) mm
IP 66 rated for indoor and outdoor installation
Fully labelled with additional labels for main switchboard
Grid protection relay (GPR) settings pre-configured to meet Australian Standards and utility requirement
AC Solar Warehouse Commercial Solar Switchboards accommodate all of the electrical hardware required to install three-phase 50kW SolarEdge systems.
For little more than the cost of the components themselves, this solar switchboard saves valuable time on site, eliminates wiring problems and speeds up commissioning.
AC Solar Warehouse have experienced in-house Registered Professional Engineers for design, test and inspection reports required by selected utilities for systems above 30kVA. (costs apply so contact us for pricing)
We prepare fault level calculations which vary from site-to-site and determine the network protection requirements to suit the specific distribution utility’s requirements.
Learn more about professional engineering support
Below is what installers are saying about AC Solar Warehouse Solar Distribution Boards?
“Hands down the easiest way to install a solar system”
“I’ll never install another solar system without using one of these boards”
“Now all our jobs look the same, and look good – regardless of the installer we use”
“How good are the distribution boards by AC Solar Warehouse. Making life easier for the boys!”
“Ducks nuts”
“Love them, so tidy”
If you’re not using one of these boards your commercial solar installs are taking longer than they need to. Try one on your next job and find out for yourself!
Commercial SolarEdge switchboard with Grid Protection Relay (GPR). Ideal for 100kW PV solar systems using SolarEdge 82.8KW inverter
Commercial SolarEdge switchboard with Grid Protection Relay (GPR). Ideal for solar systems with either single or multiple 27.6kW SolarEdge inverters
Commercial solar systems made easy with 50kW 3 phase inverter with synergy technology. Made for Australia
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module
SolarEdge P730 DC optimiser with 0.16m input leads for 2 x 72 cell PV modules
High-efficiency solar modules from Jinko Solar. The largest solar module manufacturer
High-efficiency solar modules from Jinko Solar. The largest solar module manufacturer