Selectronic Certified Fronius Symo 3PH 15kW Inverter

Downloads

 

Login or Register for pricing

5343 Symo 15.0-3 WLAN-SCERT

  • Three Phase
  • 2 MPPT
  • IP65

Selectronic Managed AC Coupling

To utilise all of the possibilities of an SP PRO, it needs to work with a Selectronic Certified grid-tie inverter.

These inverters contain hardware and software to enable direct communication with the SP PRO. This means that the SP PRO has control of the flow of energy from the solar panels with as fine control as 0.1% steps. This is known as Managed AC Coupling technology which was developed by Selectronic in 2010, and cannot be achieved with a generic grid-tie inverter.

The Selectronic Certified grid-tie inverter can be considered as an AC MPPT. By creating an AC Bus, an AC coupled system will allow PV energy to be efficiently used directly by the load with excess PV energy going back through the multi-mode SP PRO to charge batteries or export to the grid.

A maximum of five (5) Selectronic Certified inverters can be controlled by any single SP PRO, but the total AC output of the combined grid-tie inverters must not exceed twice the continuous power rating of the SP PRO, or the SP PRO 30 second rating, whichever is smallest.

When using a Selectronic Certified grid-tie inverter, site consumption and generation data will be logged by the SP PRO including the AC coupled solar production.

When to use Selectronic Certified grid-tie inverters

We recommend a Selectronic Certified grid-tie inverter for maximum system efficiency and flexibility, however one must be used with an SP PRO in the following situations:

  • Off-grid AC coupling
  • Solar Hybrid AC coupling with Fixed Export Limit requirements (with or without batteries)
  • Solar Hybrid AC coupling where twice the PV to SP PRO rating is required

Want solar but not ready to add battery storage?

Using a Selectronic Certified grid-tie inverter allows you to have a grid-tie solar power system today and add a fully managed battery storage system at a later date. This is a cost-effective, future ready solution.

Benefits of using Selectronic Certified

  • The total AC output of the combined grid-tie inverters can be up to twice the continuous power rating of the SP PRO or the SP PRO 30 second rating, whichever is smallest.
  • Maximise battery life via precise charging control
  • No frequency variations to the loads.
  • All system data is captured by SP LINK software
  • Full support from Selectronic

Selectronic have Selectronic Certified inverters from both ABB and Fronius.

CLOSE

Find a great solar installer

​​AC Solar Warehouse do not install solar and storage systems. We provide the latest products, engineering services and training to solar installation companies. To find the best solar installer in your area please complete the form below and we can provide contact details of an experienced Clean Energy Council accredited installer who can help you.

*Indicates required field


*System type

Please enter a valid email.

​AC Solar Certified retailers and installers are available in Queensland, New South Wales, Victoria, South Australia, Northern Territory, Tasmania, Western Australia, Australian Capital Territory and New Zealand. If you live in Sydney, Melbourne, Brisbane, Adelaide, Canberra, Perth, Darwin, regional towns or cities in any state of Australia and New Zealand you are interested in purchasing a solar power system for our home or business please complete the enquiry form above. We will respond within two business days with contact details of AC Solar Certified businesses in your area, and we will also arrange for the AC Solar Certified businesses to contact you to discuss your requirements.