
Enphase IQ Battery 5
The new Enphase Battery for Australia and New Zealand. The Enphase IQ Battery 5™ all-in-one AC-coupled storage system is reliable, smart, simple, and safe.
Enphase Energy was founded in March 2006 by Raghu Belur and Martin Fornage in California USA. In June 2008, Enphase Energy introduced the worlds first microinverter system and by September 2011 had reached a major milestone of shipping one million microinverters. In December 2011 Enphase went global reaching France and Italy and other countries followed soon after. In March 2012, Enphase Energy was listed on the NASDAQ and in July 2013 introduced the fourth generation technology and the M250 microinverter. Enphase has shipped over 16 million microinverters with operations in 21 countries.
In 2012 Enphase entered the Australian Market with their Generation 3 microinverter system. The introduction was very successful and the impact was immediate with many Australian solar installers realising the benefits of AC Solar technology in providing a safer, more reliable solar system that provides improved performance and the ability to provide future upgrades for customers. The take-up in Australia has also been rapid with over 1,000,000 Enphase microinverters installed including all major centres – Sydney, Melbourne, Brisbane, Canberra, Perth, Adelaide, Darwin, Hobart and regional locations.
AC Solar Warehouse is the largest Australian and New Zealand Enphase Energy distributor/wholesaler with warehouses in Brisbane, Sydney, Melbourne, Adelaide, Perth, Cairns and Auckland.
AC Solar Warehouse are experts in Enphase Energy technologies with 100+ years of combined engineering experience in solar and storage.
Download the brochure to find out more
Home Owner Brochure
The Enphase IQ Battery comes in two sizes. The Enphase IQ Battery 5 which is a 5kWh battery and a Enphase IQ Battery 10, a 10.08 kWh battery. The IQ Battery’s are AC coupled and can be installed for storing excess solar for when the sun goes down. To use the battery for backup power an Enphase IQ System Controller is installed with the battery. During outages, the IQ System Controller isolates the solar system from the grid and connects the storage.
Download the brochure to find out more
Commercial Brochure
Enphase microinverter design tool
The new Enphase Battery for Australia and New Zealand. The Enphase IQ Battery 5™ all-in-one AC-coupled storage system is reliable, smart, simple, and safe.
The new Enphase Battery for Australia and New Zealand. The Enphase IQ Battery 10™ all-in-one AC-coupled storage system is reliable, smart, simple, and safe.
The IQ System Controller senses when the grid goes down and seamlessly transitions the home from grid power to backup power.
The smart-grid ready Enphase IQ7 Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
The smart-grid ready Enphase IQ 7+ Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
The Enphase IQ7X Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
The new Enphase Energy IQ7A microinverter specifically designed to operate with 60 cell, 66 cell and 72 cell modules
Built on the fifth-generation platform, the Enphase® S230 Microinverter achieves the highest inverter efficiency for module-level power electronics. With its all-AC approach, the S230 simplifies design and installation, and delivers optimal energy harvest. The S230 is compatible with storage systems, including battery management systems.
Built on the fifth-generation platform, the Enphase® S270 Microinverter achieves the highest inverter efficiency for module-level power electronics for both 60-cell and high-powered 72-cell modules. With its all-AC approach, the S270 simplifies design and installation, and delivers the most reliable energy solution for your customers.
The S270 is compatible with energy storage systems.
The Enphase® Envoy-S Metered communications gateway delivers solar production and energy consumption data to Enphase® Enlighten monitoring and analysis software for comprehensive, remote maintenance and management of the Enphase System.
The Enphase AC Battery is an integrated energy storage system that delivers high performance and superior reliability, with the safest battery technology.
The Enphase Mobile Connect cellular modem and data plan provide easy and reliable networking of an Enphase System without needing to rely on an internet connection at the site.
The AC Trunk Cable Terminator enables the quick and easy termination of the Enphase Engage AC Trunk cable.
Use Power Line Communication bridges if the Envoy needs to be located away from the broadband router and WiFi is unavailable
AC Solar Warehouse AC Battery label kits are fully compliant with relevant standards.
Weatherproof outdoor enclosure for the Enphase AC Battery
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
100kW Commercial Enphase switchboard with Grid Protection Relay (GPR). Ideal for commercial solar systems using Enphase Microinverters.
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
The fastest and easiest way to install Enphase commercial solar systems. Includes all of the electrical hardware required to install three-phase Enphase solar systems over 15kW.
80 amp CT suitable for Enphase Envoy-S Metered + DRM
100 amp CT suitable for Enphase Envoy-S Metered + DRM
200 amp CT suitable for Enphase Envoy-S Metered + DRM
400 amp CT suitable for Enphase Envoy-S Metered + DRM
500A Split Core Current Transformer (CT) for Enphase microinverter system
1000A Split Core Current Transformer (CT) for Enphase microinverter system
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Terminator cap for unused cable ends
Sealing cap for unused Q cable connectors
Enphase Q Cable disconnect tool for Q Cable connectors, MC4 and Amphenol DC connectors, and AC module mount
Enphase Q Cable male field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
Enphase Q Cable female field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
12 AWG Unterminated weather resistant cable suitable for field-wireable connectors - No connectors included
Relay controller for voltage/frequency compliance for single-phase systems
Used to fasten cabling to the racking or to secure looped cabling
Conventional AC Isolator supplied with two-hole gland accommodating the Q cable and 4mm2 earth for the rails
AC Isolator supplied with a bulkhead Q connector pre-installed and prewired to eliminate the need to strip and terminate the Q cable on site.
The phase coupler - 3 phase allows the Enphase Envoy to communicate to microinverters and/or AC batteries when they are installed across 3 phases.
The phase coupler - 2 phase allows the Enphase Envoy to communicate to microinverters and/or AC batteries when they are installed across 2 phases.
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Relay controller for voltage/frequency compliance for three-phase systems
These glands have been designed specifically for Enphase IQ7 installations. One hole is sized for the AC Q cable and the other for a 4mm earth bond to the rails.
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving money
Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving money
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Suitable for joining Enphase Q cable up to 4 core.
100kW Commercial Enphase switchboard with Grid Protection Relay (GPR). Ideal for commercial solar systems using Enphase Microinverters.
Single phase surge protector used on Enphase and SolarEdge solar installations that are supplied via a subboard.
Used to connect IQ7 and IQ7+ microinverters to the solar module (genuine MC4 connectors)
Terminator cap for round Q Cable ends 300mm x 200mm x 200mm
The Enphase Frame Mount (Compatible with IQ Series) allows mounting of the micro inverter to a solar panel frame. There is a version for 35mm frames and a version for 40mm frames
The Enphase Frame Mount (Compatible with IQ Series) allows mounting of the micro inverter to a solar panel frame. There is a version for 35mm frames and a version for 40mm frames
Enphase stainless steel cable clips for securing Q Cable to racking. Suits Clenergy ECO rail.
Three phase surge protector used for Enphase or SolarEdge solar systems installed via a subboard.
Modem to use the mobile phone network to communicate with either an Enphase or SolarEdge system.
High quality, flexible 2 core, 2.5mm2 cabling perfect for single phase rooftop AC cable runs. Couples well with Enphase Q-Cable.
High quality, flexible 4 core and earth, 2.5mm2 cabling perfect for three phase rooftop AC cable runs. Couples well with Enphase Q-Cable.
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Single phase AC isolator for use on Enphase and SolarEdge solar systems
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters, and other electrical appliances caused by electrical surges on the AC cabling of the solar system.
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters
Provides an IP68 rated terminator for a multicore 2.5mm2 cable. Suitable for Enphase Q cable up to 4 core.
Three phase AC isolator for use on Enphase and SolarEdge solar systems
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The ethernet surge protector is connected to the ethernet cable of SolarEdge inverters or Enphase Envoy. The ethernet surge protector reduces faults in SolarEdge inverters or Enphase Envoy caused by electrical surges on the communication cabling.
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters, and other electrical appliances caused by electrical surges on the AC cabling of the solar system.
The Enphase® Envoy S Standard communications gateway delivers solar production data to the Enphase® Enlighten monitoring and analysis software for comprehensive, remote maintenance and management of the Enphase System.
Indicates required field
System type
Please enter a valid email.
AC Solar Certified retailers and installers are available in Queensland, New South Wales, Victoria, South Australia, Northern Territory, Tasmania, Western Australia, Australian Capital Territory and New Zealand. If you live in Sydney, Melbourne, Brisbane, Adelaide, Canberra, Perth, Darwin, regional towns or cities in any state of Australia and New Zealand you are interested in purchasing a solar power system for our home or business please complete the enquiry form above. We will respond within two business days with contact details of AC Solar Certified businesses in your area, and we will also arrange for the AC Solar Certified businesses to contact you to discuss your requirements.