How to connect a GSD to an Enphase Envoy

Installing a GSD (Generation Signalling Device) on an Enphase microinverter system to meet the new Queensland Emergency Backstop requirements is simple 3 step process:

 

1- Mount the GSD in a suitable location – usually within the Solar Distribution Board. If using an AC Board (supplied by AC Solar Warehouse) there is plenty of room to accommodate the GSD within the enclosure.

 

2- Connect AC power to the GSD by wiring it directly to the Main Switch Inverter Supply.

 

3- Connect the control wires to the Envoy DRM terminals #1 and #3 via the RJ45 adapter that is supplied with the GSD.  (Note that when making these connections the pre-wired resistor must be removed from these terminals first)

 

Enphase Energy have released a Tech Brief providing detailed instructions on connecting the GSD to Enphase systems.

 

You can also reference our recently published article on the Queensland GSD requirements for more details.

 

For help installing a GSD in conjunction with any of our products, our account management and engineering team are here to help.  You can reach them on 

07 4028 3979

Contact

  • Email

  • info@acsolarwarehouse.com

  • Phone

  • Australia: 07 4028 3979

  • New Zealand: 09 222 2262

  • Postal

  • PO Box 408, Cairns

  • Queensland 4870

  • Main office

  • 310 Spence Street, Bungalow

  • Queensland 4870

  • Warehouses

    • Brisbane

    • Hemmant 4174

    • Sydney

    • Riverwood 2210

    • Melbourne

    • 14 Sugar Gum Court

    • Braeside 3195

    • Perth

    • Cannington 6107

    • Adelaide

    • Gillman 5013

    • Cairns

    • Bungalow 4870

    • Auckland

    • New Zealand

    • Christchurch

    • New Zealand

CLOSE

Find a great solar installer

​​AC Solar Warehouse do not install solar and storage systems. We provide the latest products, engineering services and training to solar installation companies. To find the best solar installer in your area please complete the form below and we can provide contact details of an experienced Clean Energy Council accredited installer who can help you.

*Indicates required field


*System type

Please enter a valid email.

​AC Solar Certified retailers and installers are available in Queensland, New South Wales, Victoria, South Australia, Northern Territory, Tasmania, Western Australia, Australian Capital Territory and New Zealand. If you live in Sydney, Melbourne, Brisbane, Adelaide, Canberra, Perth, Darwin, regional towns or cities in any state of Australia and New Zealand you are interested in purchasing a solar power system for our home or business please complete the enquiry form above. We will respond within two business days with contact details of AC Solar Certified businesses in your area, and we will also arrange for the AC Solar Certified businesses to contact you to discuss your requirements.