Enphase IQ7 microinverter
The smart-grid ready Enphase IQ7 Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
Enphase IQ7X microinverter
IQ7X-96-2-INT
315VA nominal
MC4 DC connectors
female AC connector
Compatible with 96-cell PV modules ONLY
The new Enphase Energy IQ7X microinverter specifically designed to operate with 96 cell modules (up to 420W) is now available in Australia.
Compatible modules include:
- SunPower Maxeon 3 370 – 400 W
- SunPower Maxeon 2 340 – 360 W
- SunPower X22-360 – 360 W
- SunPower E20-E27 – 327 W
You can check to see if a specific module is able to be used with the IQ7X microinverter using the Enphase Module Compatibility Calculator. Please click the button below
Module Compatibility Calculator
IQ7X IS NOT SUITABLE FOR USE WITH 60 OR 72 CELL MODULES
Enphase IQ7X Microinverter
The smart-grid ready Enphase IQ7X Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics. Its polymeric enclosure and revolutionary cabling system simplify installation.
- Optimised for high powered 96-cell modules
- Nominal Output Power: 315 VA
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
Easy to Install
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Built-in rapid shutdown
Productive and Reliable
- Optimised for high powered 96-cell modules
- More than a million hours of testing
- Class II double-insulated enclosure
- Clean Energy Council (CEC) listed
Smart Grid Ready
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
- Meets CA Rule 21 (UL 1741-SA)
Mechanical Data
- Connector type: MC4 locking type
- Dimensions (WxHxD): 212 mm x 175 mm x 30.2 mm (without bracket)
- Weight: 1.08 kg
- Cooling: Natural convection – No fans
- Approved for wet locations: Yes
- Enclosure: Class II double-insulated
- Environmental category / UV exposure rating: NEMA Type 6 / outdoor
Enphase IQ7 is more powerful than anything you’ve seen before
- 96.5% EU efficiency
- 23% more power than S230
- 47% lighter than S270
- IP67 double insulated enclosure
- Smart Grid ready
- Unique new Q Cable system that is lighter and more flexible to use
- Works with Envoy-S Metered
Find out more about IQ7
Enphase microinverter design tool
Related products
Enphase IQ7+ microinverter
The smart-grid ready Enphase IQ 7+ Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
Enphase Q Cable – single phase portrait
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase Q Cable – single phase landscape
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase Q Cable – 3 phase portrait
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase Q Cable – 3 phase landscape
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase Q Cable disconnect tool
Enphase Q Cable disconnect tool for Q Cable connectors, MC4 and Amphenol DC connectors, and AC module mount
Enphase Q Cable male connector
Enphase Q Cable male field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
Enphase Q Cable female connector
Enphase Q Cable female field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
Enphase RAW Q Cable
12 AWG Unterminated weather resistant cable suitable for field-wireable connectors - No connectors included
Enphase Q Relay – single phase
Relay controller for voltage/frequency compliance for single-phase systems
Enphase Q Relay – three phase
Relay controller for voltage/frequency compliance for three-phase systems
Enphase Q series AC Isolator
Conventional AC Isolator supplied with two-hole gland accommodating the Q cable and 4mm2 earth for the rails
Enphase Q series plug and play AC Isolator
AC Isolator supplied with a bulkhead Q connector pre-installed and prewired to eliminate the need to strip and terminate the Q cable on site.
Enphase IQ7 2 hole cable gland (25mm- single phase)
These glands have been designed specifically for Enphase IQ7 installations. One hole is sized for the AC Q cable and the other for a 4mm earth bond to the rails.
Enphase solar distribution board – Q1 single phase indoor with RCBO’s
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q1 single phase outdoor with RCBO’s
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 single phase indoor with RCBO’s
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 single phase outdoor with RCBOs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q1 3 phase indoor with RCBOs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q1 3 phase outdoor with RCBOs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 3 phase indoor with MCBs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 3 phase outdoor with MCBs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 single phase indoor with MCB’s
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Phase Coupler – 2 phase
The phase coupler - 2 phase allows the Enphase Envoy to communicate to microinverters and/or AC batteries when they are installed across 2 phases.
Phase Coupler – 3 phase
The phase coupler - 3 phase allows the Enphase Envoy to communicate to microinverters and/or AC batteries when they are installed across 3 phases.
Enphase solar distribution board – Q2 single phase outdoor with MCBs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase ethernet bridge
Use Power Line Communication bridges if the Envoy needs to be located away from the broadband router and WiFi is unavailable
Enphase solar distribution board – Q1 single phase indoor with MCB’s
The fastest and easiest way to install Enphase microinverter systems
Enphase solar distribution board – Q1 single phase outdoor with MCB’s
The fastest and easiest way to install Enphase microinverter systems
Enphase solar distribution board – Q1 3 phase indoor with MCBs
The fastest and easiest way to install Enphase microinverter systems
Enphase solar distribution board – Q1 3 phase outdoor with MCBs
The fastest and easiest way to install Enphase microinverter systems
Enphase commercial solar distribution board
The fastest and easiest way to install Enphase commercial solar systems. Includes all of the electrical hardware required to install three-phase Enphase solar systems over 15kW.
500A CT for Enphase Envoy S Metered
500A Split Core Current Transformer (CT) for Enphase microinverter system
1000A CT for Enphase Envoy S Metered
1000A Split Core Current Transformer (CT) for Enphase microinverter system
AC Battery switchboard label kit
AC Solar Warehouse AC Battery label kits are fully compliant with relevant standards.
Enphase Envoy S Metered + DRM
The Enphase® Envoy-S Metered communications gateway delivers solar production and energy consumption data to Enphase® Enlighten monitoring and analysis software for comprehensive, remote maintenance and management of the Enphase System.
Enphase AC Battery
The Enphase AC Battery is an integrated energy storage system that delivers high performance and superior reliability, with the safest battery technology.
Enphase Mobile Connect
The Enphase Mobile Connect cellular modem and data plan provide easy and reliable networking of an Enphase System without needing to rely on an internet connection at the site.
AC Surge Protector (1ph) – SolarEdge and Enphase (Mainboard)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters, and other electrical appliances caused by electrical surges on the AC cabling of the solar system.
AC Surge Protector (1ph) – SolarEdge and Enphase (Sub-board)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters, and other electrical appliances caused by electrical surges on the AC cabling of the solar system.
AC Surge Protector (3ph) – SolarEdge and Enphase (Sub-board)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters
