SolarEdge P350C Commercial DC Optimiser
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box.
SolarEdge modbus energy meter
SE-MTR-3Y-400V-A
The Energy Meter with Modbus Connection is used for production, consumption or import/export monitoring and for Export Limitation. The meter has high accuracy readings and by a wide selection of current transformers (50A – 1000A) supports residential and commercial installations.
The meter connects to the SolarEdge inverter or Control and Communication Gateway via RS485.
For installation and configuration instructions, refer to the Export Limitation application note.
Feature Highlights:
- High accuracy meter readings (up to 0.5%) for production/consumption monitoring
- Supplies meter readings to the inverter for Feed-in Limitation
- Small and easy to install – fits in standard electrical panel
- Supports residential, commercial and utility-size installations
Related products
SolarEdge 3Ø 82.8kW inverter with WiFi & SetApp – Primary unit
Commercial solar systems made easy with 82.8kW 3 phase inverter with synergy technology. Made for Australia
‘Old Model’ – DC junction box for SolarEdge
The SolarEdge DC junction box is a pre-assembled weather-proof enclosure used to combine DC circuits on the roof. Allowing a single DC circuit to be run to the inverter.
SolarEdge 3Ø 17kW inverter with WiFi & SetApp – Commercial
The E-Series is the next generation of low power, three phase inverters from SolarEdge.
SolarEdge Firefighter gateway
The firefighter gateway provides centralised safety management of SolarEdge systems.
SolarEdge Wind velocity sensor
The wind sensor provides highly accurate and robust wind horizontal velocity measurements.
SolarEdge 1000A Split-core current transformer
The SolarEdge 1000A Current Transformers (CT) are used with the SolarEdge Modbus Meter to monitor energy usage.
Enphase commercial solar distribution board with secondary network protection – (custom)
The fastest and easiest way to install Enphase commercial solar systems. Includes all of the electrical hardware required to install three-phase Enphase solar systems over 15kW.
SolarEdge P500 power optimiser with 0.16m input
SolarEdge P500 DC Optimiser for use on 96-cell PV modules
SolarEdge P600 DC Optimiser with 0.16m input
SolarEdge P600 DC optimiser with 0.16m input for 2 x 60-cell PV modules
SolarEdge P800P DC Optimiser
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module
SolarEdge Control and communication gateway
The SolarEdge Control and Communication Gateway expands the SolarEdge monitoring and control capabilities.
SolarEdge label kit
AC Solar Warehouse SolarEdge label kits are fully compliant with relevant standards.
SolarEdge RS485 Expansion kit
The RS485 Expansion Kit provides an additional RS485 port for enhanced communications.
SolarEdge 250A Split-core current transformer
The SolarEdge 250A Current Transformers (CT) are used with the SolarEdge Modbus Meter to monitor energy usage.
SolarEdge Wi-Fi Module Kit
The Wi-Fi Communication Solution enables wireless communication between the SolarEdge inverter and any Wi-Fi router.
