Everything you need to communicate with Tigo TS4 range of MLPE devices
For Indoor use
Tigo’s Cloud Connect Advanced (CCA) Kit includes everything you need to communicate with the range of Tigo TS4 MLPE devices for a standard domestic installation.
The Indoor Kit includes a CCA, a TAP Gateway, and DIN rail mounted power supply.
Once installed this will allow you to see module-level monitoring data through the Tigo cloud.
Essentially, the CCA is wired to the AC power and connects to the internet router via Wifi or direct connection with a data cable.
The TAP is installed on the roof in the middle of the solar array and is wired to the CCA via a Cat5/RS-485 cable. The Cat5/RS-485 cable should be installed in a method that is outdoor rated, and UV resistant to prevent any weather damage. The TAP communicates wirelessly with each Tigo Optimiser and you commission the system using the Tigo SMART app.
If the solar array is very large, or split over multiple roof faces or there are physical barriers between the solar modules, you may require additional TAPs. When you use additional TAPs they are wired one to another using the Cat5/RS-485 cable. Most small residential systems use only one TAP if all the solar modules are together on the roof.
Each TAP supports up to 300 Optimisers within 35 meters with no physical barriers.
Each CCA supports up to 7 TAPs with maximum 900 Optimisers per CCA.
If you are installing more than 900 Optimisers, you can simply add more CCA’s.
Cloud Connect Advanced (CCA)
DIN Rail power supply
DIN rail power supply:
Not outdoor rated, install in enclosure
Input: 100-240VAC – 50/60Hz 0.88A
Output: 24VDC @ 1A
The power supply for the Cloud Connect Advanced draw less than 1A and can be installed on GPO circuits.
Tigo's RSS (Rapid Shutdown) Signal Detector is a functionality testing device for sensing the power-line communication (PLC) signal from Tigo’s RSS Transmitter to Tigo's UL-certified Fire Safety solutions
TS4-F units automatically enter rapid shutdown mode when the RSS Transmitter is switched off and resumes production when the RSS Transmitter is switched on.
Find a great solar installer
AC Solar Warehouse do not install solar and storage systems. We provide the latest products, engineering services and training to solar installation companies. To find the best solar installer in your area please complete the form below and we can provide contact details of an experienced Clean Energy Council accredited installer who can help you.
*Indicates required field
Please enter a valid email.
AC Solar Certified retailers and installers are available in Queensland, New South Wales, Victoria, South Australia, Northern Territory, Tasmania, Western Australia, Australian Capital Territory and New Zealand. If you live in Sydney, Melbourne, Brisbane, Adelaide, Canberra, Perth, Darwin, regional towns or cities in any state of Australia and New Zealand you are interested in purchasing a solar power system for our home or business please complete the enquiry form above. We will respond within two business days with contact details of AC Solar Certified businesses in your area, and we will also arrange for the AC Solar Certified businesses to contact you to discuss your requirements.