SolarEdge HD-Wave 1Ø 3kW inverter with WiFi & SetApp (EV charger ready)
This is the world's first EV charger incorporated into a solar inverter
SolarEdge HD-Wave 1Ø 5kW inverter with WiFi & SetApp (EV charger ready)
SE5000H-AU000BNV4
Best EV charger in Australia
This is the world’s first EV charger incorporated into a solar inverter
Homeowners can charge electric vehicles up to four times faster than a standard Level 1 charger through an innovative solar boost mode that utilises grid and PV charging simultaneously.
An integrated EV charger and solar inverter eliminates the need for a separate EV charger and the additional wiring, conduit and potential switchboard upgrades that comes with it.
Whether your customer owns an EV now or just wants to be EV-ready, future-proof their home with SolarEdge.
Use solar to charge your EV
EV charging during Off-peak hours
Monitor solar, EV charging and energy usage
Integrates with the SolarEdge monitoring platform. Homeowners can track their charging status, control vehicle charging, and set charging schedules. Monitoring features include:
- Smart-scheduling for use with Time of Use (TOU) rates — charge from the grid during off-peak hours
- Track solar, EV, and grid consumption for visibility and control of household energy usage
- Remote operation via mobile app — turn charging on and off
- View charging duration, charge energy, and percent charge from solar
- Easy inverter commissioning directly through your smartphone using the SetApp mobile application
Inverter only – cable is ordered separately
SolarEdge EV charger installation
Related products
SolarEdge EV charger cable and holder, 4.5m, type 1, 32A
This is the world's first EV charger incorporated into a solar inverter
SolarEdge EV charger cable and holder, 7.6m, type 1, 32A
This is the world's first EV charger incorporated into a solar inverter
SolarEdge EV charger cable and holder, 7.6m, type 2, 32A
This is the world's first EV charger incorporated into a solar inverter
SolarEdge P370 power optimiser with 0.16m input
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box.
LG Energy Solution RESU10H-R
The RESU10H (SolarEdge) residential energy storage system has been designed to suit SolarEdge DC optimised solar systems.
‘Old Model’ – DC junction box for SolarEdge
The SolarEdge DC junction box is a pre-assembled weather-proof enclosure used to combine DC circuits on the roof. Allowing a single DC circuit to be run to the inverter.
SolarEdge Firefighter gateway
The firefighter gateway provides centralised safety management of SolarEdge systems.
SolarEdge Irradiance sensor
The irradiance sensor is a high-quality solar cell. It measures solar irradiance levels for photovoltaic systems.
SolarEdge Wind velocity sensor
The wind sensor provides highly accurate and robust wind horizontal velocity measurements.
AC isolator 35A (single phase)
Single phase AC isolator for use on Enphase and SolarEdge solar systems
SolarEdge label kit
AC Solar Warehouse SolarEdge label kits are fully compliant with relevant standards.
SolarEdge Module temperature sensor
The module temperature sensor measures the temperature at the back of the photovoltaic panel.
AC Surge Protector (1ph) – SolarEdge and Enphase (Sub-board)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters, and other electrical appliances caused by electrical surges on the AC cabling of the solar system.
DC Surge Protector – SolarEdge HD Wave Inverters (residential only)
The DC surge protector is connected to the DC cabling of SolarEdge HD Wave single-phase inverters from 2.5kW to 10kW.
SolarEdge device control zigbee module
The main communications module to control up to 10 SolarEdge Zigbee devices. Cannot be installed with the SolarEdge WiFi module.
SolarEdge 4.8kW smart energy hot water controller
Maximize self-consumption by storing excess energy as hot water
Ethernet Surge Protector – SolarEdge and Enphase
The ethernet surge protector is connected to the ethernet cable of SolarEdge inverters or Enphase Envoy. The ethernet surge protector reduces faults in SolarEdge inverters or Enphase Envoy caused by electrical surges on the communication cabling.
SolarEdge AC Switch with Meter
Maximise the use of your solar by switching loads. Wireless AC switch with meter.
SolarEdge modbus energy meter
The SolarEdge Modbus meter is used for production, consumption or import/export monitoring and for Export Limitation.
SolarEdge RS485 Expansion kit
The RS485 Expansion Kit provides an additional RS485 port for enhanced communications.
SolarEdge Control and communication gateway
The SolarEdge Control and Communication Gateway expands the SolarEdge monitoring and control capabilities.
SolarEdge Wi-Fi Module Kit
The Wi-Fi Communication Solution enables wireless communication between the SolarEdge inverter and any Wi-Fi router.
RS485 Surge Protector Base – SolarEdge HD Wave inverters
Base for RS485 Surge Protector Cartridge – SolarEdge HD Wave inverters
