
Enphase IQ Relay (20A single phase)
IQ Relay controller for voltage/frequency compliance for single-phase systems
In Enphase installations, the IQ Relay (network system relay controller) acts as a physical disconnection device relay controller for three-phase installations.
During specified grid abnormalities, the IQ Relay disconnects the Enphase Microinverters from the AC grid, and when the voltages return to normal and the grid frequency is in the acceptable range, the IQ Relay reconnects the system.
The IQ Relay works in series with the IQ Gateway to break both line and neutral, when needed, per grid requirements.
Easy to Install
• Lightweight and simple
• DIN rail mount for quick installation
Reliable
• Dependable load control
• Automatically resets when normal voltage resumes
Smart
• Performs voltage and frequency ride-through
• Easy to read LEDs
• Remote upgrade capability
Find out more about IQ7
Enphase microinverter design tool
IQ Relay controller for voltage/frequency compliance for single-phase systems
The smart-grid ready Enphase IQ7 Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
The smart-grid ready Enphase IQ 7+ Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
The Enphase IQ Cable and accessories are part of the seventh generation Enphase IQ System.
The Enphase IQ Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase IQ Cable disconnect tool for Q Cable connectors, MC4 and Amphenol DC connectors, and AC module mount
Enphase Q Cable male field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
Enphase IQ Cable female field-wireable connector requires MC4 crimp tool for connections to IQ Cable or RAW IQ Cable
Conventional AC Isolator supplied with two-hole gland accommodating the Q cable and 4mm2 earth for the rails
AC Isolator supplied with a bulkhead Q connector pre-installed and prewired to eliminate the need to strip and terminate the Q cable on site.
The phase coupler - 2 phase allows the Enphase Envoy to communicate to microinverters and/or AC batteries when they are installed across 2 phases.
The phase coupler - 3 phase allows the Enphase Envoy to communicate to microinverters and/or AC batteries when they are installed across 3 phases.
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
The fastest and easiest way to install Enphase commercial solar systems. Includes all of the electrical hardware required to install three-phase Enphase solar systems over 15kW.
The Enphase® Envoy-S Metered communications gateway delivers solar production and energy consumption data to Enphase® Enlighten monitoring and analysis software for comprehensive, remote maintenance and management of the Enphase System.
The Enphase AC Battery is an integrated energy storage system that delivers high performance and superior reliability, with the safest battery technology.
AC Solar Warehouse AC Battery label kits are fully compliant with relevant standards.
80 amp CT suitable for Enphase IQ Gateway Metered + DRM
400 amp CT suitable for Enphase IQ Gateway Metered + DRM
100 amp CT suitable for Enphase IQ Gateway-S Metered + DRM
500A Split Core Current Transformer (CT) for Enphase microinverter system
1000A Split Core Current Transformer (CT) for Enphase microinverter system
The Enphase IQ7X Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
Use Power Line Communication bridges if the Envoy needs to be located away from the broadband router and WiFi is unavailable
Ferrite core for use in suppressing electrical noise to improve Power Line Carrier (PLC) communications. Suitable for use on Enphase Microinverter systems
The new Enphase Energy IQ7A microinverter specifically designed to operate with 60 cell, 66 cell and 72 cell modules
Three phase AC isolator for use on Enphase and SolarEdge solar systems
The ethernet surge protector is connected to the ethernet cable of SolarEdge inverters or Enphase Envoy. The ethernet surge protector reduces faults in SolarEdge inverters or Enphase Envoy caused by electrical surges on the communication cabling.
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving money
Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving money
*Indicates required field
*System type
Please enter a valid email.
AC Solar Certified retailers and installers are available in Queensland, New South Wales, Victoria, South Australia, Northern Territory, Tasmania, Western Australia, Australian Capital Territory and New Zealand. If you live in Sydney, Melbourne, Brisbane, Adelaide, Canberra, Perth, Darwin, regional towns or cities in any state of Australia and New Zealand you are interested in purchasing a solar power system for our home or business please complete the enquiry form above. We will respond within two business days with contact details of AC Solar Certified businesses in your area, and we will also arrange for the AC Solar Certified businesses to contact you to discuss your requirements.