Enphase IQ Solar Distribution Board – Q1 single phase, indoor (RCBOs)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q1 three phase, indoor (RCBO)
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase Solar Distribution Board accommodates the Envoy Communications Gateway and all of the electrical hardware required to install a 3 phase Enphase system
For little more than the cost of the components themselves, the Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Includes:
• IP30 rated surface mount enclosure with removable chassis for indoor installation
• 40A High quality Hager main switch
• 6A High quality Hager MCB for Envoy supply
• 25A High quality Hager RCBO for solar circuit
• 3 pre-installed productions CTs
• 25A 3 Phase Q Relay with phase coupling
• Completely pre-wired and tested
• Pre-labelled to AS/NZS 5033/4777 requirements with additional labels for main board
**Consumption CT’s are not supplied with the board and need to be ordered separately (options include: 80A, 100A, 200A, 400A)**
WHAT INSTALLERS ARE SAYING ABOUT OUR BOARDS
“Hands down the easiest way to install Enphase systems”
“I’ll never install another Enphase system without using one of these boards”
“Now all our jobs look the same, and look good – regardless of the installer we use”
“How good are the distribution boards for Enphase by AC Solar Warehouse. Making life easier for the boys!”
“Ducks nuts”
“Love them, so tidy”
WHY USE ENPHASE SOLAR DISTRIBUTION BOARDS FROM AC SOLAR WAREHOUSE?
The original Australian and New Zealand Enphase Solar Distribution Boards
GET THE BEST DEAL
AC Boards are assembled in-house and supplied direct to you. Purchase with your Enphase equipment and save.
GET IT FAST
AC Boards are prewired, tested and available from our warehouses in Sydney, Brisbane, Melbourne, Adelaide, Perth, Cairns and Auckland allowing fast dispatch and delivery.
YOU’RE IN SAFE HANDS
AC Solar Warehouse is the largest ‘authorised’ distributor of Enphase Energy products in Australia and New Zealand.
- AC Boards are designed and certified by in-house registered professional engineers and electricians with Clean Energy Council accreditation for design and installation of solar systems
- Compliant with relevant Australian and New Zealand standards and utility requirements
- Industry recognised specialists in Enphase Energy products
- AC Boards are endorsed by Enphase Energy
- Free technical support prior to purchase and after sales from authorised Enphase Energy experts
- AC Solar Warehouse do not sell direct to public
CUSTOM BOARDS ARE AVAILABLE UPON REQUEST
If you wish to specify a custom board please detail what alterations/additions you would like made to one of the existing models. Or simply tell us what you are installing and we will design the board for you.
Examples of additional components are: Surge diverters, extra MCB’s, extra Q relay’s etc.
If you’re not using an AC Board your Enphase installs could be taking longer than they need to. Try one on your next job and find out for yourself!
Related products
Enphase Solar Distribution Board – Q1 single phase, outdoor (RCBO)
Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase IQ Solar Distribution Board – Q2 single phase, indoor (RCBOs)
Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q2 single phase, outdoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q1 three phase, outdoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q2 three phase, indoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving money
Enphase Solar Distribution Board – Q2 three phase, outdoor (MCB)
Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving money
VARTA Pulse 6 – Battery switchboard label kit
Includes labels as per requirements for the Clean Energy Council Energy storage installation guidelines
Enphase Solar Distribution Board – Q2 single phase, indoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q2 single phase, outdoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q1 single phase, indoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Enphase Solar Distribution Board – Q1 single phase, outdoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Enphase Solar Distribution Board – Q1 three phase, indoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Enphase Solar Distribution Board – Q1 three phase, outdoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Enphase commercial solar distribution board with secondary network protection – (custom)
The fastest and easiest way to install Enphase commercial solar systems. Includes all of the electrical hardware required to install three-phase Enphase solar systems over 15kW.
Enphase IQ7X microinverter (315W)
The Enphase IQ7X Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
Enphase Q Cable – Portrait (three phase)
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase Q Cable – Landscape (three phase)
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase Q Disconnect Tool
Enphase Q Cable disconnect tool for Q Cable connectors, MC4 and Amphenol DC connectors, and AC module mount
Enphase Q Connector (male)
Enphase Q Cable male field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
Enphase Q Connector (female)
Enphase Q Cable female field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
Enphase RAW Q Cable
12 AWG Unterminated weather resistant cable suitable for field-wireable connectors - No connectors included
AC Surge Protector (3ph) – SolarEdge and Enphase (Sub-board)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters
Ethernet Surge Protector – SolarEdge and Enphase
The ethernet surge protector is connected to the ethernet cable of SolarEdge inverters or Enphase Envoy. The ethernet surge protector reduces faults in SolarEdge inverters or Enphase Envoy caused by electrical surges on the communication cabling.
Enphase Q series AC Isolator
Conventional AC Isolator supplied with two-hole gland accommodating the Q cable and 4mm2 earth for the rails
Enphase Q series plug and play AC Isolator
AC Isolator supplied with a bulkhead Q connector pre-installed and prewired to eliminate the need to strip and terminate the Q cable on site.
AC isolator 35A (three phase)
Three phase AC isolator for use on Enphase and SolarEdge solar systems
PLC ethernet bridge
Use Power Line Communication bridges if the Envoy needs to be located away from the broadband router and WiFi is unavailable
Enphase IQ7 microinverter (240W)
The smart-grid ready Enphase IQ7 Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
Enphase IQ7+ microinverter (290W)
The smart-grid ready Enphase IQ 7+ Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
Enphase IQ7A microinverter (349W)
The new Enphase Energy IQ7A microinverter specifically designed to operate with 60 cell, 66 cell and 72 cell modules
AC Board – Enphase microinverters (160A max)
100kW Commercial Enphase switchboard with Grid Protection Relay (GPR). Ideal for commercial solar systems using Enphase Microinverters.
AC Board – Enphase microinverters (160A max) – QLD
100kW Commercial Enphase switchboard with Grid Protection Relay (GPR). Ideal for commercial solar systems using Enphase Microinverters.
Enphase Solar Distribution Board – Q1 three phase, indoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q3 single phase, indoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q3 single phase, outdoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q3 single phase, outdoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q1 two phase, indoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q1 two phase, indoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q1 two phase, outdoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q1 two phase, outdoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q2 two phase, indoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q2 two phase, outdoor (MCB)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q2 two phase, outdoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q2 two phase, indoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase Solar Distribution Board – Q3 single phase, indoor (RCBO)
The Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning. Saving you money
Enphase IQ Battery 10
The new Enphase Battery for Australia and New Zealand. The Enphase IQ Battery 10™ all-in-one AC-coupled storage system is reliable, smart, simple, and safe.
Enphase IQ Battery 5
The new Enphase Battery for Australia and New Zealand. The Enphase IQ Battery 5™ all-in-one AC-coupled storage system is reliable, smart, simple, and safe.
Enphase IQ System Controller
The IQ System Controller senses when the grid goes down and seamlessly transitions the home from grid power to backup power.
Enphase IQ7 DC Connector (Replacements)
Used to connect IQ7 and IQ7+ microinverters to the solar module (genuine MC4 connectors)
Enphase Frame Mount – compatible with IQ 35mm
The Enphase Frame Mount (Compatible with IQ Series) allows mounting of the micro inverter to a solar panel frame. There is a version for 35mm frames and a version for 40mm frames
Enphase Frame Mount – compatible with IQ 40mm
The Enphase Frame Mount (Compatible with IQ Series) allows mounting of the micro inverter to a solar panel frame. There is a version for 35mm frames and a version for 40mm frames
Enphase stainless steel cable clips (bag of 100)
Enphase stainless steel cable clips for securing Q Cable to racking. Suits Clenergy ECO rail.
PLC ferrite core
Ferrite core for use in suppressing electrical noise to improve Power Line Carrier (PLC) communications. Suitable for use on Enphase Microinverter systems
3G/4G Cellular modem with 5yr data plan
Modem to use the mobile phone network to communicate with either an Enphase or SolarEdge system.
AC extension cable – 100m roll(2.5mm2 – 3Ø – 4C+E)
High quality, flexible 4 core and earth, 2.5mm2 cabling perfect for three phase rooftop AC cable runs. Couples well with Enphase Q-Cable.
AC extension cable – 100m roll (2.5mm2 – 1Ø – 2C+E)
High quality, flexible 2 core and earth, 2.5mm2 cabling perfect for three phase rooftop AC cable runs. Couples well with Enphase Q-Cable.
AC extension cable – 100m roll (2.5mm2 – 3Ø – 4C+E)
High quality, flexible 4 core and earth, 2.5mm2 cabling perfect for three phase rooftop AC cable runs. Couples well with Enphase Q-Cable.
1000A CT for Enphase Envoy S Metered
1000A Split Core Current Transformer (CT) for Enphase microinverter system
500A CT for Enphase Envoy S Metered
500A Split Core Current Transformer (CT) for Enphase microinverter system
Enphase Q Cable – Landscape (three phase) – 2.3m pitch for 72 cell modules
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
AC cable terminator
Provides an IP68 rated terminator for a multicore 2.5mm2 cable. Suitable for Enphase Q cable up to 4 core.
