Enphase solar distribution board – Q1 single phase indoor with RCBO’s
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 single phase outdoor with RCBOs
Downloads
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase Solar Distribution Board accommodates the Envoy Communications Gateway and all of the electrical hardware required to install a single-phase Enphase system with an array of up to 15kW.
For little more than the cost of the components themselves, the Enphase Solar Distribution Board saves valuable time on site, eliminates wiring problems and speeds up commissioning.
Includes:
• IP65 rated surface mount enclosure with removable chassis for outdoor installation. Not for installation in direct sunlight.
• Prewired Envoy S Metered + DRM
• 40A High quality Hager main switch
• 6A High quality Hager MCB for Envoy supply
• 2 x 20A High quality Hager RCBOs for solar circuit
• 2 x 20A Enphase Q-Relays
• Completely pre-wired and tested
• Pre-labelled to AS/NZS 5033/4777 requirements with labels for main board also included
**1 x Consumption CT and 1 x Production CT are included with board**
Dimensions 435(L)x340(W)x165(D)mm
WHAT INSTALLERS ARE SAYING ABOUT OUR BOARDS
“Hands down the easiest way to install Enphase systems”
“I’ll never install another Enphase system without using one of these boards”
“Now all our jobs look the same, and look good – regardless of the installer we use”
“How good are the distribution boards for Enphase by AC Solar Warehouse. Making life easier for the boys!”
“Ducks nuts”
“Love them, so tidy”
WHY USE OUR ENPHASE SOLAR DISTRIBUTION BOARDS?
The original Australian Enphase Solar Distribution Boards
- We are the leading authorised distributor of Enphase Energy products in Australia
- We are industry recognised specialists in Enphase Energy products
- Our boards are designed and certified by in-house registered professional engineers with Clean Energy Council accreditation for design and installation of solar systems
- Our boards are designed to comply with relevant Australian Standards
- Free technical support prior to purchasing, and after sales, from Enphase Energy experts
- GREAT VALUE – Our boards are assembled in-house and supplied direct to you
CUSTOM BOARDS ARE AVAILABLE UPON REQUEST
If you wish to specify a custom board please detail what alterations/additions you would like made to one of the existing models. Or simply tell us what you are installing and we will design the board for you.
Examples of additional components are: Surge diverters, extra RCBO’s, extra Q relay’s etc.
If you’re not using one of these boards your Enphase installs are taking longer than they need to. Try one on your next job and find out for yourself!
Add product to an order enquiry
Related products
Enphase solar distribution board – Q1 single phase outdoor with RCBO’s
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 single phase indoor with RCBO’s
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q1 3 phase indoor with RCBOs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q1 3 phase outdoor with RCBOs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 3 phase indoor with MCBs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 3 phase outdoor with MCBs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
VARTA battery switchboard label kit
Includes labels as per requirements for the Clean Energy Council Energy storage installation guidelines
Enphase solar distribution board – Q2 single phase indoor with MCB’s
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q2 single phase outdoor with MCBs
THE FASTEST AND EASIEST WAY TO INSTALL ENPHASE MICROINVERTER SYSTEMS
Enphase solar distribution board – Q1 single phase indoor with MCB’s
The fastest and easiest way to install Enphase microinverter systems
Enphase solar distribution board – Q1 single phase outdoor with MCB’s
The fastest and easiest way to install Enphase microinverter systems
Enphase solar distribution board – Q1 3 phase indoor with MCBs
The fastest and easiest way to install Enphase microinverter systems
Enphase solar distribution board – Q1 3 phase outdoor with MCBs
The fastest and easiest way to install Enphase microinverter systems
Enphase commercial solar distribution board
The fastest and easiest way to install Enphase commercial solar systems. Includes all of the electrical hardware required to install three-phase Enphase solar systems over 15kW.
Enphase AC Battery outdoor enclosure IP65
Weatherproof outdoor enclosure for the Enphase AC Battery
Enphase IQ7X microinverter
The Enphase IQ7X Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
Enphase Q Cable – single phase portrait
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase Q Cable – single phase landscape
The Enphase Q Cable and accessories are part of the seventh generation Enphase IQ System.
Enphase Q Cable Terminator
Terminator cap for unused cable ends
Enphase Q Cable sealing caps
Sealing cap for unused Q cable connectors
Enphase Q Cable disconnect tool
Enphase Q Cable disconnect tool for Q Cable connectors, MC4 and Amphenol DC connectors, and AC module mount
Enphase Q Cable male connector
Enphase Q Cable male field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
Enphase Q Cable female connector
Enphase Q Cable female field-wireable connector requires MC4 crimp tool for connections to Q Cable or RAW Q Cable
Enphase RAW Q Cable
12 AWG Unterminated weather resistant cable suitable for field-wireable connectors - No connectors included
Enphase Q Cable clips
Used to fasten cabling to the racking or to secure looped cabling
Ethernet Surge Protector – SolarEdge and Enphase
The ethernet surge protector is connected to the ethernet cable of SolarEdge inverters or Enphase Envoy. The ethernet surge protector reduces faults in SolarEdge inverters or Enphase Envoy caused by electrical surges on the communication cabling.
AC Surge Protector (1ph) – SolarEdge and Enphase (Sub-board)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters, and other electrical appliances caused by electrical surges on the AC cabling of the solar system.
Enphase Q series AC Isolator
Conventional AC Isolator supplied with two-hole gland accommodating the Q cable and 4mm2 earth for the rails
Enphase Q series plug and play AC Isolator
AC Isolator supplied with a bulkhead Q connector pre-installed and prewired to eliminate the need to strip and terminate the Q cable on site.
Enphase IQ7 2 hole cable gland (25mm- single phase)
These glands have been designed specifically for Enphase IQ7 installations. One hole is sized for the AC Q cable and the other for a 4mm earth bond to the rails.
AC Isolator – single phase
Single phase AC isolator for use on Enphase and SolarEdge solar systems
Enphase ethernet bridge
Use Power Line Communication bridges if the Envoy needs to be located away from the broadband router and WiFi is unavailable
Enphase IQ7 microinverter
The smart-grid ready Enphase IQ7 Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
Enphase IQ7+ microinverter
The smart-grid ready Enphase IQ 7+ Microinverter is built on the seventh-generation platform and achieves the highest efficiency for module-level power electronics.
