‘Old Model’ – DC junction box for SolarEdge
The SolarEdge DC junction box is a pre-assembled weather-proof enclosure used to combine DC circuits on the roof. Allowing a single DC circuit to be run to the inverter.
SolarEdge 3Ø 30kW inverter with WiFi & SetApp – Commercial
SE30K-AU00IBNV4
The SolarEdge PV inverter combines sophisticated digital control technology with efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability.
The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions.
A proprietary data monitoring receiver has been integrated into the inverter and aggregates the power optimiser performance data from each PV module. This data can be transmitted to the web and accessed via the SolarEdge Monitoring Platform for performance analysis, fault detection and troubleshooting of PV systems.
Three Phase Inverter Feature highlights:
- Inverters specifically designed to work with power optimisers
- Superior efficiency
- Excellent reliability with standard12-year warranty (extendable to 20 or 25 years)
- Small, lightweight and easy to install
- Built-in module-level monitoring receiver
- Communication to internet via broadband or wireless ZigBee
- IP65 / NEMA 3R – Outdoor and indoor installation
E-Series Inverters
The E-Series is the next generation of low power, three phase inverters from SolarEdge. Featuring multiple design improvements, the E-Series is smaller, lighter and easier to install than previous models. Suitable for both outdoor and indoor installations, these inverters operate even quieter than before following removal of the external fan combined with an upgraded internal fan.
Monitoring capabilities for commercial systems
Related products
SolarEdge P350C Commercial DC Optimiser
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box.
SolarEdge P650 commercial power optimiser with 0.16m input
SolarEdge P650 DC optimiser with 0.16m input for 2 x 72 cell PV modules
SolarEdge P730 commercial power optimiser with 0.16m input
SolarEdge P730 DC optimiser with 0.16m input leads for 2 x 72 cell PV modules
SolarEdge P850 commercial power optimiser with 0.16m input
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module
SolarEdge Irradiance sensor
The irradiance sensor is a high-quality solar cell. It measures solar irradiance levels for photovoltaic systems.
SolarEdge Wind velocity sensor
The wind sensor provides highly accurate and robust wind horizontal velocity measurements.
SolarEdge label kit
AC Solar Warehouse SolarEdge label kits are fully compliant with relevant standards.
SolarEdge Firefighter gateway
The firefighter gateway provides centralised safety management of SolarEdge systems.
SolarEdge Module temperature sensor
The module temperature sensor measures the temperature at the back of the photovoltaic panel.
AC isolator 35A (three phase)
Three phase AC isolator for use on Enphase and SolarEdge solar systems
SolarEdge device control zigbee module
The main communications module to control up to 10 SolarEdge Zigbee devices. Cannot be installed with the SolarEdge WiFi module.
Ethernet Surge Protector – SolarEdge and Enphase
The ethernet surge protector is connected to the ethernet cable of SolarEdge inverters or Enphase Envoy. The ethernet surge protector reduces faults in SolarEdge inverters or Enphase Envoy caused by electrical surges on the communication cabling.
SolarEdge 250A Split-core current transformer
The SolarEdge 250A Current Transformers (CT) are used with the SolarEdge Modbus Meter to monitor energy usage.
SolarEdge Control and communication gateway
The SolarEdge Control and Communication Gateway expands the SolarEdge monitoring and control capabilities.
SolarEdge modbus energy meter
The SolarEdge Modbus meter is used for production, consumption or import/export monitoring and for Export Limitation.
SolarEdge RS485 Expansion kit
The RS485 Expansion Kit provides an additional RS485 port for enhanced communications.
SolarEdge Wi-Fi Module Kit
The Wi-Fi Communication Solution enables wireless communication between the SolarEdge inverter and any Wi-Fi router.
DC Surge Protector – SolarEdge Inverters (commercial)
The DC surge protector is connected to the DC cabling of SolarEdge three-phase inverters. The DC surge protector reduces faults in inverters and DC optimisers
