SolarEdge Module temperature sensor

 

SE1000-SEN-TMOD-S2

Environmental sensors are used to monitor a site’s irradiance, temperature, and wind velocity, and to calculate site performance ratio (PR). The sensors connect to the commercial gateway and the measurements are displayed in the monitoring platform. Up to three sensors can be connected to a single commercial gateway.

Additional sensors can be installed using multiple gateways.

  • Irradiance sensor (SE1000-SEN-IRR-S1): The irradiance sensor is a high-quality solar cell. It measures solar irradiance levels for photovoltaic systems. The sensor’s irradiance output signal is 0 to 1V covering a 0 to 1000W/m2 range.
  • Ambient temperature sensor (SE1000-SEN-TAMB-S2): The ambient temperature sensor measures the surrounding temperature. The sensor’s measurement signal is 0 to 10V covering a -40 to +90°C range.
  • Module temperature sensor (SE1000-SEN-TMOD-S2): The module temperature sensor measures the temperature at the back of the photovoltaic panel. The sensor’s measurement signal is 4 to 20mA covering a -40 to +90°C range.
  • Wind sensor (SE1000-SEN-WIND-S1): The wind sensor provides highly accurate and robust wind horizontal velocity measurements. The sensor’s output signal is 4 to 20mA covering a 0 to 50 m/s range.Solar
CLOSE

Find a great solar installer

​​AC Solar Warehouse do not install solar and storage systems. We provide the latest products, engineering services and training to solar installation companies. To find the best solar installer in your area please complete the form below and we can provide contact details of an experienced Clean Energy Council accredited installer who can help you.

*Indicates required field


*System type

Please enter a valid email.

​AC Solar Certified retailers and installers are available in Queensland, New South Wales, Victoria, South Australia, Northern Territory, Tasmania, Western Australia, Australian Capital Territory and New Zealand. If you live in Sydney, Melbourne, Brisbane, Adelaide, Canberra, Perth, Darwin, regional towns or cities in any state of Australia and New Zealand you are interested in purchasing a solar power system for our home or business please complete the enquiry form above. We will respond within two business days with contact details of AC Solar Certified businesses in your area, and we will also arrange for the AC Solar Certified businesses to contact you to discuss your requirements.