SolarEdge P370 power optimiser with 0.16m input
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box.
SolarEdge RS485 Expansion kit
SE1000-RS485-IF
The RS485 Expansion Kit provides an additional RS485 port for enhanced communications. The kit contains a module which is installed on the communication board and has a 3-pin RS485 terminal block.
Feature Highlights:
- Allows connection of devices to a multiple inverter system without a Control and Communication Gateway
- Allows daisy chain configuration of multiple RS485 buses for communications in commercial
- Installed within the inverter enclosure for outdoor resilience
- Reduces labor cost with simple and quick installation
Related products
SolarEdge P300 DC Optimiser
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box.
SolarEdge 3Ø 17kW inverter with WiFi & SetApp – Commercial
The E-Series is the next generation of low power, three phase inverters from SolarEdge.
SolarEdge 1Ø 5kW StorEdge inverter with backup
In addition to optimising self-consumption, StorEdge can also automatically provide backup power to pre-selected loads when the household suffers from grid interruptions.
SolarEdge 3Ø 15kW inverter with WiFi & SetApp – Commercial
The E-Series is the next generation of low power, three phase inverters from SolarEdge. Featuring multiple design improvements, the E-Series is smaller, lighter and easier to install than previous models.
SolarEdge 1000A Split-core current transformer
The SolarEdge 1000A Current Transformers (CT) are used with the SolarEdge Modbus Meter to monitor energy usage.
SolarEdge Control and communication gateway
The SolarEdge Control and Communication Gateway expands the SolarEdge monitoring and control capabilities.
SolarEdge 250A Split-core current transformer
The SolarEdge 250A Current Transformers (CT) are used with the SolarEdge Modbus Meter to monitor energy usage.
SolarEdge Wi-Fi Module Kit
The Wi-Fi Communication Solution enables wireless communication between the SolarEdge inverter and any Wi-Fi router.
SolarEdge modbus energy meter
The SolarEdge Modbus meter is used for production, consumption or import/export monitoring and for Export Limitation.
SolarEdge P350C Commercial DC Optimiser
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box.
