Schletter - FixZ Pro module support (front and rear) - Black

    This combination does not exist.

    Login or Register to view prices and place an order

    SKU: 165005-014

    Item ID: 2530

    How does the Fix Z Pro module support front and rear work?

    The FixZ Pro module support works an interface to clamp panels to the railing system. Here's a simplified step by step of its installation:

    1. Position the FixZ rails on the multi-adapter, ensuring the square channel is at the bottom of the rail.
    2. Make sure the higher side of the rail faces downward along the slope of the roof for both top and bottom rails.
    3. Secure the FixZ rail to the fasteners by tightening the M8 bolt with the recommended torque (15 Nm).
    4. Attach elevation elements to the rear FixZ Pro rails to adjust panel tilt orientation (50, 100, and 150 degrees).
    5. Once the desired tilt angle is achieved using elevation elements, add Module Support Pro to the front and rear legs.
    6. Lock the Module Support Pro in place using the same mechanism as the elevation elements.

    About Schletter Fix Z Pro system

    The Schletter Fix Z Pro system consists of fastening frames securing Proline rails which support PV modules. The pre-assembled components, slide-in rail joiners without the use of screws and click-in module clamps, account for ease of installation and industry leading installation times.

    • Suitable for pitched roofs, flat roofs, and barrel roofs
    • Ideal for metal roofs: trapezoidal, corrugated, Kliplok
    • Slight increase at the upper module support in 90 mm increments

    The components are made from Aluminium and High-Grade Steel allowing durability in adverse site conditions. The system comes with a 25-year warranty that is compliant with Australian Standards:

    • AS/NZS 1170.2:2021 for wind actions
    • AS/NZS 1170.1:2002 (R2016) for imposed loadings, and
    • AS/NZS 1170.0:2002 for general principles.


    For metal roofs with a slope of less than 10°, installing modules parallel to the roof may not be ideal for maximum yield and optimal self-cleaning. Conventional support by struts is also often impossible or uneconomical because of the higher loads.

    In such cases, flat elevation angles – such as can be achieved with FixZ Pro – offer a universal, extremely flexible and cost-effective solution with ideal load transfer into the roof covering.