SolarEdge P370 power optimiser with 0.16m input
The SolarEdge power optimiser is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box.
SolarEdge HD-Wave 1Ø 6kW inverter with WiFi & SetApp
SE6000H-AU000BWU4
Single phase inverter with HD-Wave technology
The SolarEdge single phase inverter with HD-Wave technology is specifically designed to work with SolarEdge power optimisers and features a standard 12-year warranty extendable to 20 or 25 years.
- Specifically designed to work with SolarEdge power optimisers
- 2.5kW to 10kW range
- 99% weighted efficiency (33%-50% less losses than the market standard)
- Small, lightweight, and easy to install
- Up to 155% oversizing allowed
- High reliability due to lower heat dissipation
- Advanced safety features, including integrated arc fault protection
- Quick and easy inverter commissioning directly from your smartphone using the SolarEdge SetApp
- Standard 12-year warranty (extendable to 20 or 25 years)
- Built-in panel-level monitoring
- Internet communication via built-in Ethernet and Wi-Fi* connectivity (or optional ZigBee® or cellular plug-ins)
- Manages PV production, battery storage, and smart energy products
- IP65 – suitable for outdoor and indoor installations* Built-in Wi-Fi is supported by SetApp-enabled inverters only. Antenna is included.
* Built-in Wi-Fi is supported by SetApp-enabled inverters only. Antenna is included.
Find out more about How to use SetApp click here
Related products
LG Energy Solution RESU10H-R
The RESU10H (SolarEdge) residential energy storage system has been designed to suit SolarEdge DC optimised solar systems.
‘Old Model’ – DC junction box for SolarEdge
The SolarEdge DC junction box is a pre-assembled weather-proof enclosure used to combine DC circuits on the roof. Allowing a single DC circuit to be run to the inverter.
SolarEdge Firefighter gateway
The firefighter gateway provides centralised safety management of SolarEdge systems.
SolarEdge Irradiance sensor
The irradiance sensor is a high-quality solar cell. It measures solar irradiance levels for photovoltaic systems.
SolarEdge Wind velocity sensor
The wind sensor provides highly accurate and robust wind horizontal velocity measurements.
SolarEdge label kit
AC Solar Warehouse SolarEdge label kits are fully compliant with relevant standards.
SolarEdge Module temperature sensor
The module temperature sensor measures the temperature at the back of the photovoltaic panel.
AC Surge Protector (1ph) – SolarEdge and Enphase (Sub-board)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters, and other electrical appliances caused by electrical surges on the AC cabling of the solar system.
DC Surge Protector – SolarEdge HD Wave Inverters (residential only)
The DC surge protector is connected to the DC cabling of SolarEdge HD Wave single-phase inverters from 2.5kW to 10kW.
AC Surge Protector (3ph) – SolarEdge and Enphase (Sub-board)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters
SolarEdge device control zigbee module
The main communications module to control up to 10 SolarEdge Zigbee devices. Cannot be installed with the SolarEdge WiFi module.
SolarEdge 4.8kW smart energy hot water controller
Maximize self-consumption by storing excess energy as hot water
Ethernet Surge Protector – SolarEdge and Enphase
The ethernet surge protector is connected to the ethernet cable of SolarEdge inverters or Enphase Envoy. The ethernet surge protector reduces faults in SolarEdge inverters or Enphase Envoy caused by electrical surges on the communication cabling.
SolarEdge AC Switch with Meter
Maximise the use of your solar by switching loads. Wireless AC switch with meter.
AC Surge Protector – SolarEdge and Enphase inverters (mainboard)
The AC surge protector is connected to the AC cabling of SolarEdge and Enphase inverters. The AC surge protector reduces faults in inverters, and other electrical appliances caused by electrical surges on the AC cabling of the solar system.
SolarEdge Control and communication gateway
The SolarEdge Control and Communication Gateway expands the SolarEdge monitoring and control capabilities.
SolarEdge modbus energy meter
The SolarEdge Modbus meter is used for production, consumption or import/export monitoring and for Export Limitation.
SolarEdge RS485 Expansion kit
The RS485 Expansion Kit provides an additional RS485 port for enhanced communications.
SolarEdge Wi-Fi Module Kit
The Wi-Fi Communication Solution enables wireless communication between the SolarEdge inverter and any Wi-Fi router.
RS485 Surge Protector Base – SolarEdge HD Wave inverters
Base for RS485 Surge Protector Cartridge – SolarEdge HD Wave inverters
